How Smooth Does a Planer Get Wood?


While planing, how smooth does a planner get wood? The truth is, your wood surface ought to be free from scallops for the finishing work to be successful. Planing is a finishing technique that aims at making surfaces even. Having a perfectly working planer is paramount for your success.

Whether yours is hand-held or motorized planer should be able to remove most of the excess wood on the wood surface. The smoothing of surfaces is normally sufficient for most projects. However, there is an extent of perfection which planing doesn’t reach. Therefore, sanding is done to achieve a smooth finish. Use a jointer as a precursor for the planing work. This helps in keeping the board level.

As a side note, check these woodworking designs and projects that I recommend by clicking here.

What is the Role of a Planer?

This woodworking tool assists in making boards even. You need to have accurate measurements of structures for your projects to be successful. It begins by perfecting the removal of excess wood on a surface. With a planer, it is easier to shed off a layer of wood to make it attain the thickness you desire.

The rough boards can make your carpentry work seem complex as you need to make all sides level. A planer will not only help with the flattening but with the removal of rough spots as well. If you are in a large-scale operation setting such as in a woodworking shop, stationery planers are the best. However, for the offsite applications, you can always rely on the hand-held ones.

How Effective Is a Planer in Smoothing Wood?

Since we already know that a planer is capable of making a surface smooth, it is high time to go deeper. The effectiveness of the tool is influenced by a couple of factors. One is the type of wood being worked on. There are woods such as Red Cedar which makes planing cumbersome in some way. It often causes the blade to lose sharpness after some time. This is not the case when dealing with relatively softer woods.

Secondly, we have the issue of the type of wood planer used. The hand-held ones can go a long way in achieving the smoothness but as compared to the powered ones. Find the types which have sharp cutting edges which are in acute angles. With planners, anyone will have an easy time removing glaring imperfections and removing splinters. However, the smoothness achieved is at a relatively lower end than when sanding.

Use of Jointers

I find it routine to use a jointer before entering the planing stage. It makes it easy to deal with the problems of warping and twisting pieces of wood. This is achieved by making both faces of a board parallel and square to each other. You, therefore, get rid of errors in woodworking which results in wastage of wood material.

If you are dealing with large volumes of wood, having powered jointers is significant as it saves you time. What you need is much care while using the machine as your fingers need protection. Always wear some leather-made gloves to be on the safe side.

Achieving sublime smoothness for the woodwork finish is significant. This is why proper planing is significant. When done right, this can make the surface well-prepared for the priming, staining, sealing, and painting. However, sanding cannot completely be overlooked as planing may not be comprehensive. Always remember to use jointers before the planing task.

Recent Posts