DeWalt vs. Ridgid planer battle is a dilemma that occurs to most woodworkers. A planer is a must-have for woodworkers. It carefully smoothens and levels your board to the desired thickness. Choosing the best planer to work with can sometimes be overwhelming and hectic. This is why I am going to give you a comparison of these two renown brands of planers; Dewalt and Ridgid, and share my thoughts on the best one to work with.
In this post, I am going to compare the latest models of both brands; Ridgid 13” R4330 planer and DeWalt 13” 735X planner.
I will explain the differences in their features, performance, value, and finally, give my final thoughts of each model.
The DeWalt DW735x is one of the best tools used for wood planing. Thanks to its two-speed gearbox, which enables you to determine the speed to work with. It also gives you full control over your work and helps you stay focused on your work. There is a three-year limited warranty that comes with it, which ensures that protection from defects. There are more details about this device below.
The Ridgid R4330 planer is another powerful woodworking tool that reduces the thickness of the wood. Its quick changing and dual-edged blades allow you to work on your piece until you get the desired width and depth.
This corded thickness planner by Ridgid has a 15 Amp, 120 Volt motor putting out 9000 RPMs. This ensures increased power and continuous operation.
It has a capacity of 13 inches in width and 6 1/8 inches tall.
The cutter head of this planner features three dual-edged blades, thus are reversible having a maximum cut depth of 1/8 inch.
The blades are self-aligning, which is a design for quick changes. The blades ensure the surfaces are smooth.
There is a locking feature to the power switch to prevent unintended use, which is a safety feature for children.
The top-mounted handle enables you to make precise adjustments of even 1/16th inch for each revolution.
Outfeed and infeed tables are secure and stable enough to prevent snipe by providing optimum support to the workplace.
Each side of the table is fitted with top screws, which allow for adjustments to be made to level the inner surface and outfeed tables when needed.
Underneath the tables, you will find small metal levers, which will enable them to stay closed when they are not in use.
The blade carriage is designed in such a way that it keeps the cutter head secure by minimizing snipe through a lock.
There is a thickness indicator(6-inch) on the right side to the front of the unit, which shows the setting of the cutter head and is the thickness after planing.
The indicator allows for any adjustments to accurately keep the machine through changing the indicator.
Ind-I-Cut system, a gauge that gives a measurement of the stock removed based on the setting of wood and cutter head.
The system relies on a ball bearing resting on the wood to determine the thickness not removed.
Ridgid included a Repeat-A-Cut design, which aids keep the stock uniform. Once set, the knob will not allow wood paning beyond the set depth.
There are 8 built stops in the knob. They range from 1/8th of an inch to 1-3/4 of an inch.
The planer has knobs that feature soft-touch controls to offer comfort and firm grip.
A steel top has built-in glides for easy setup of workplace and durability.
A simple and effective dust removal system that allows you to attach a dust collection unit directly to the planner.
There is a blade wrench included having a storage compartment to the left of the unit.
Overload protector, which prevents overheating when there is intensive use of the planer. You can reset the machine after cooling by pressing the reset button.
This planer offers a 20,000 RPM Motor with a Cutter head speed of 10000 RPM. The motor (15AMP) provides enough power for the effective planing of more great wood pieces without bogging down.
It offers two selections of speed for speed to customize it ultimately.
You can select 96 to 179 cuts per inch depending on which cut you want, a dimensional cut, or finishing cut.
A three-knife cutter with upgraded blades for them to be in use for long without wear.
An attached wrench is used to remove the top of the machine to access the blades for proper maintenance.
It has a large base featuring 19-3/4-inch aluminum, which makes it different from the other planers to allow for support.
There is a large turret style stop, a depth stops, which enables the use of standard material thicknesses with much ease.
A thickness scale having an extra definition to provide an accurate measurement of wood depth. The set screw provides long term accuracy.
A chip ejector uses a fan to help in the removal of chips from the carriage allowing connection to dust extractors.
This planer is incredible in how it works. The only concern is snipe, which is common among many planers.
The collection technique of dust and debris of this unit is fantastic. I tested this by use of a standard-issue shop vac and was shocked at how it left so little on the table.
The cutter head rotates evenly and smoothly, pulling in the wood at a slow but steady pace.
If you are new to planing, it will give so much comfort during use.
I tried using different woods and combinations on it to see how it works with them and the results it brought.
I tried planning palette wood, and it was amazing how the wood was transformed completely after passing it through the planer once.
I did this for the satisfactory of the DIY community, which mostly uses this type of wood.
I am positive that this was yellow pine, which is a softwood.
For those who love making cutting boards, this is the machine to go for. I tried it by attaching six 1×2 boards and planning them at 1/8-inch removal, and it handled that pretty well. The result was beautifully smooth.
I also tested two 1×4 crap boards that we attached with glue and biscuits and planed it with minimum glue squeeze, and it came out well.
I found out that it works well with rough woods like cedar too. I was completely blown away on how good it worked with cedar after using some scrap boards to work with.
This planer’s ability to perform is fantastic and satisfying. I tried the two settings to compare which of them gave the best result.
The dimensional planing offers 79 cuts per inch and works well at providing initial thickness.
I preferred the finishing setting since it gives a beautiful finish, something that all woodworkers would appreciate.
I worked with all kinds of woods ranging from softwoods like pine to hardwoods such as walnut, maple, and zebrawood.
In comparison to other planers of its class, this one is a heavy duty planer, as evidenced by its weight of 92 pounds.
It bears a few features that make it stand out from the rest. One of the highlights is having a more extensive base where the wood meets the cutter head to remove material.
Most planers have a base of 10 inches while DeWalt went overboard to have it at 19 ¾ inches. This leaves me to conclude that that is the reason behind its efficiency.
The carriage lock, which is automatic when the wood inserts, holds the wood firmly, reducing instances of snipe.
While snipe is present in every planer, I think that this feature reduces it as compared to other planers I have ever used.
Together with the large table, this design adds stability, thus further contributing to a reduction of snipe.
The chip ejection is elegantly designed to eject most debris though some remain on the table powerfully.
Though for maximum dirt collection, vacuum or dust collection should be connected to the planer as it is supposed to be.
Another great addition to this planer is the material removal gauge. It helps to maintain the quality of the planer by regulating the removal of too much material at once.
The depth stop is more effective and secure than other depth stops. You can quickly set the desired thickness by just turning the large knob to ensure consistent results.
Adjustments and maintenance for this planner are simple too. The adjustment knob has a consistent depth change for each revolution and a smooth feel.
You can easily read and adjust the thickness scale also. From the way its design, you are in apposition to quickly recalibrate by tightening the screws.
The blades are easily accessible to remove and replace when required for maintenance.
To access them, you can easily remove the screws with the tool provided to safely and quickly remove the top of the device.
This planer is affordable though it costs more than other planers of its class. I think that its quality and exceptional performance make it worth its value.
It has infeed and outfeed tables as well as another set of blades for change and unique design. If you don’t need extra-large planers, then this is for you.
You can get this model DeWalt DW735X at Amazon at a retail price by clicking here.
This planer is provided at an incredibly affordable price at Amazon for the model Ridgid R4331. Its features and performance perfectly match its value.
I would recommend it to a hobbyist or someone who is starting woodworking.
It bears the benefits of a small footprint, portability, and quality.
For the features, Ridgid has more features and a user-friendly design, nothing like DeWalt, which is much more sophisticated.
Smart features like Ind-I-Cut and Repeat-A-Cut make Ridgid an excellent choice.
When it comes to performance, differences between the two planers are negligible, although I loved the efficiency of the DeWalt planer more.
The quality of its production is perfect from its design to do heavy duty work to reduced levels of snipe.
The adjustments are accurately giving you ultimate control over the tool. It gives you the finish you need by having a dimensional cut and finishing cut, which makes it outstanding.
If you are looking for a cheaper planer, then Ridgrid is the planer for you.
DeWalt may be more expensive, but it provides more accessories like the extra blades and tables, which you will not be required to buy in the future.
So, in my opinion, purchasing a DeWalt planner saves on cost in the long run.
Both DeWalt and Ridgid planers are excellent choices for your workshop though your choice will depend on the functionality of the planer and the size of your pocket.
Both planers have excellent features with DeWalt having more unique features though Ridgid is more user-friendly.
Ridgid planer is cheaper than DeWalt planer it terms of price though the value for each product matches its price.
This does not mean that Ridgid planer is of low quality; in fact, its quality surpasses that of other planers in the market.
Based on my experience with both the planers, I recommend DeWalt over Ridgid.
The DeWalt planer is a brilliant planer found at an affordable price though higher than that of other planers.
It offers perfection in your cuttings if that is what you are looking for in a planer. It has so many features that make your planing job much easier.
The Ridgid planer is a dual-edge with a quick change of blades. It is the simplest and safest to use and powerful with a three-blade cutter head.
This planer will surely help in completing even the most complicated tasks. The features, performances, and value of both the DeWalt and Ridgid planers are incredible.
But of course, there will always be one which is better than the other. This entirely depends on one’s preference and test.
I recently wrote an article on Wiping Stain Vs. Penetrating Stain. Read it here.