Is painting poplar wood something worth trying? Is it even feasible at all? Different ideas stem from the topic of painting this hardwood. Some see it as an activity that can be done at the snap of a finger. Others find it to be an uphill task. What brings the difference?
The truth is, poplar wood can be painted with ease. As a newbie, such a task can be done efficiently only if you follow the right procedure. Know about the variables needed for the whole operation such as primers and sandpapers. With poplar wood, it is not necessary to use some wood grain fillers for the surface to be perfectly level.
(Need help with crafting unique and attractive woodworking projects? Check this out this amazing plans that you can build! Click here)
The Sanding Procedure
A successful painting is dependent on the starting point which is preparing the poplar wood. The nature of the surface ought to be well-prepared for the painting work. This is where you use the sandpapers in the right order. Begin by the 120-grit papers and go for the higher-grit options for finer smoothing.
Most hardwoods are open-grained which means they need some filling for the wood structure to be compact. Good examples are oak and mahogany. This is different from the poplar wood. Its structure is closed or tight hence the sanding is enough for the smooth surface finish.
Priming of Poplar Wood
Before getting to the actual painting, be thorough with the application of prime on the wood. There are a couple of benefits from this such as proper prevention of staining on the paint. This tends to happen when the wood is bleeding. For poplar wood, there are no tannins which make it less likely for the bleed-through to occur.
When we apply prime on this type of wood, it creates a better biting edge for the paint. It results in the paint bonding well due to the increased adhesion. Sometimes, there is diversity in the porosity levels at several points on the wood. This may interfere with the uniformity of the paint after the application. The primer shields you well on this issue.
The Painting Operation
At this stage, the poplar wood is well-set for the painting. What one needs is the right brushes for the spreading of the paint equally. The bristles ought to be soft for you to have an easy time. If you can, draw some small lines with a fade pencil on the surface. Through this, it becomes easy to plan on the starting and endpoint for the painting task.
Similar to the staining operations in woodwork, the painting can be done in two layers. In most cases, this offers extra protection of the exterior of the wood structure after an abrasion. The hack lay in allowing enough time for the first paint to dry. I once used a clear coating on top of the paint to offer that extra protection. It may also help someone aiming at making the paint more radiant or shiny.
Poplar wood makes it easy for painting operation. This is partly because its structure is closed hence needs no wood grain fillers. However, proper sanding is necessary for a better bite of the paint into the surface. Before the actual painting, applying a primer is significant.